Product ID:COATING COMPOUND, METAL PRETREATMENT, ACID
MSDS Date:01/01/1987
FSC:8030
NIIN:00-082-2425
Kit Part:Y
MSDS Number: BRFKW

TRIANGLE COATINGS, INC.

1930 FAIRWAY DRIVE
SAN LEANDRO, CA 94577
US

Emergency Phone: 510-284-9031

Info Phone: 510-895-8000

Cage: 0GB20

TRIANGLE COATINGS INC

SAN LEANDRO, CA 94577-5631 US

Telephone: 800-895-8000

Cage: 0GB20

ETHYL ALCOHOL (VAPOR PRESSURE 53.9 MM HG @ 20C)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: <70%

ACGIH TLV: 1000 PPM

ORTHOPHOSPHORIC ACID (VAPOR PRESSURE 5.9 MM HG @ 20C)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: <15%

ACGIH TLV: 1.0 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE TOXICITY: OVEREXPOSURE CAN LEAD
TO CENTRAL NERVOUS SYSTEM DEPRESSION (HEADACHE, DIZZINESS, NAUSEA,
UNCONSCIOUSNESS). EYE: SLIGHT IRRITATION. TESTS SHOW OVEREXPOSURE
MAY CAUSE BLOOD DISORDERS AND NEUROLOGIC DISORDERS. INTENTIONAL
MISUSE OF THIS PRODUCT MAY BE HARMFUL OR FATAL.
Effects of Overexposure:CHRONIC; SKIN: PROLONGED & REPEATED CONTACT MAY
BE MORE IRRITATING. SKIN CONTACT: PROLONGED & REPEATED LIQUID
CONTACT CAN CAUSE DEFATTING & DRYING OF SKIN WHICH MAY RESULT IN
SKIN IRRITATION & DERMATI TIS. REPORTS ASSOCIATE REPEATED &
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/PERM BRAIN &
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:NONE

First Aid:EYE: FLUSH W/WATER 15 MIN HOLD EYELID OPEN. GET MED AID.
SKIN: WASH W/SOAP & WATER. REMOVE CONTAMINATD CLOTHES & SHOES. DONT
REUSE TILL CLEANED. IF PERSISTENT IRRIT OCCURS, GET MED AID.
INHALE: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHINGDIFFICULT,
ARTIFICIAL RESPIRATN IF NOT BREATHING. GET MED AID. INGEST: GET MED
AID. NOTHING BY MOUTH TO UNCONSCIOUS. INDUCE VOMIT W/IPECAC:1 OZ
THEN 8 OZ WATER.

Flash Point Method:SCC
Flash Point:60.0F,15.6C
Lower Limits:3.0
Upper Limits:19.0
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM, WATER FOG
Fire Fighting Procedures:EVACUATE HAZARD AREA. WEAR PROTECTIVE CLOTHES
INCLUDING NIOSH SCBA. COOL FIRE EXPOSED CONTAINER W/WATER. AVOID
SPREADING BURNING LIQUID W/WATER USED FOR COOLING
Unusual Fire/Explosion Hazard:THIS MATERIAL IS FLAMMABLE AND MAY BE
IGNITED BY HEAT, SPARKS, FLAME OR STATIC ELECTRICITY.

Spill Release Procedures:STAY UPWIND AND AWAY FROM SPILL. KEEP ALL
SOURCES OF IGNITION AND HOT METAL SURFACES AWAY FROM SPILL. IF
SPILL IS INDOORS, VENTILATE AREA OF SPILL. IF LARGE SPILL, CALL
SPILL RESPONSE TEAM. NOTIFY APP ROPRIATE STATE AND LOCAL AGENCIES.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAME. KEEP CONTAINERS CLOSED. STORE AWAY FORM STRONG OXIDIZERS IN
COOL, DRY PLACE W/EXPLOSION PROOF VENT.
Other Precautions:GROUND EQUIPMENT TO PREVENT ACCUMULATION OF STATIC
CHARGE. IF POURING OR TRANSFERRING MATERIALS, CONTAINER MUST BE
BONDED AND GROUNDED. DO NOT WELD, HEAT, OR DRILL ON/NEAR CONTAINER,
EVEN EMPTIED CONT AINERS CAN CONTAIN EXPLOSIVE VAPORS.

Respiratory Protection:DEPENDING ON THE NATURE AND CONCENTRATION OF THE
AIRBORNE MATERIAL, USE A RESPIRATOR OR GAS MASK WITH APPROPRIATE
CARTRIDGES AND CANNISTERS (NIOSH APPROVED, IF AVAILABLE), OR
SUPPLIED AIR EQUIPMENT.
Ventilation:USE EXPLOSION PROOF VENT AS REQ'D TO CONTROL VAPOR
CONCENTRATIONS. ADDITION VENT/EXHAUST MAY BE REQ'D TO KEEP BELOW
TLV.
Protective Gloves:WEAR IMPERVIOUS GLOVES
Eye Protection:WEAR CHEMICAL RESISTANT GOGGLES
Other Protective Equipment:WEAR PROTECTIVE CLOTHING AS REQUIRED TO
PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH WITH SOAP & WATER BEFORE EATING, DRINKING,
SMOKING, USING TOILET FACILITIES. WASH CONTAMINATED CLOTHES BEFORE
REUSE
Supplemental Safety and Health

HCC:F6
Boiling Pt:B.P. Text:165 TO 309F
Vapor Density:> AIR
Spec Gravity:7.7 LBS/GAL
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH ALKALIES, AQUEOUS ACIDS, AMINES AND ACIDIC ALCOHOLS.
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT, SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND/OR CARBON DIOXIDE.
Conditions to Avoid Polymerization:AVOID HEAT, SPARKS, AND OPEN FLAME.

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH FEDERAL,
STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.